» Measuring Machines and Devices » Bore Gauging » DIATRON 6000 - Electronic Measuring Tool

DIATRON 6000 - Electronic Measuring Tool

The Diatron 6000 is a 4 channel display unit (analogue and digital) with SPC capability for connecting up to 4 inductive probes. The colour LCD screen displays up to 4 characteristics with coloured bars (green= in tolerances; yellow=warning limits exceeded; red=out of tolerance) as well as the digital value. The Diatron 6000 is suitable for workshops as well as for testing labs. The touch screen enables easy and intuitive programming of the unit. Via a maximum of 5 buttons all functionscan be engaged and programmed. Communication (programming and data transfer of measured values) with the PC takes place via USB interface.

With the aid of the (PC) software supplied any amount of measuring programmes can be programmed and stored in the data base. If required these can be transferred to the DIatron 6000. Measured values are converted into MS Excell or QS-Stat format.

Characteristics

• Colour touch screen
• USB Interface
• Software included

Display

5.7'' Colour touch screen with 320x240 pixels
Only programmed attributes are displayed
Display of measured values: coloured bars
Range chart and histogram for each attribute
Resolution 0.001 and 0.0001
Units: mm and inch.

Measuring tasks

Internal, external measuring, length measuring
Dynamic measuring (maximum, minimum, ovality)
Trigonometric functions (SIN, COS, TAN, ARCCOS, ARCTAN)
Tolerances in form, position, wall thickness, etc by connecting probes (factors of max +/-20)

Measuring Frequency

Adjustable 1-200 measurements per second

Measuring range/preset

Maximum range of probe +/-mm
Interval prestabilit ± 999.000

Storage of Values

Maximum capacity of 8700 values per attribute with date and time
The measured value can be transferred to a computer via USB interface
The measured values remain in the DIATRON even without being connected to power

Interface

4 connectors for electronic probes (tesa compatible half-bridge)
12 V power supply
Digital I/O (start/stop measuring; measured value in/out of tolerance) for external control
Foot switch
2 USB Interfaces

Measuring programmes

Maximum of 6 programmes can be stored in the DIATRON 6000
In the data base of the PC software any amount of programmes can be stored.